Fantasea-line Nano Flash Action 700 Lighting Set Manuel d'utilisateur télécharger pdf (Page 6)



Fantasea Nano Flash Instruction Manual 26110120

What are Pre-Flashes?

Pre-flashes are one or more flashes given out to assist in the focusing and

exposure setting of the camera before the actual picture-taking primary flash

is fired. It is important to set the Nano Flash to the correct pre-flash setting so

it fires in sync with the primary flash of the camera.

The Nano Flash features 3 different pre-flash settings (image #4):

1  For cameras with no pre-flash

2  For cameras with 1 pre-flash

3  For cameras with 2 pre-flashes

ii. In order to properly synchronize the Nano Flash with your camera, you should

determine which pre-flash program on the Nano Flash is the most suitable

with your camera internal flash. In order to do so, please follow the

instructions below:

1. Place your digital camera in front of the Nano Flash within a distance of

approximately 1 meter, so they are facing each other.

2. Set your camera built-in flash to ON.

3. Turn the Nano Flash on by setting the Pre-

picture with your camera. Do the same when the Pre-Flash Mode Dial is set



4. Compare the 3 images taken in the 3 different pre-flash modes. The most

overexposed image indicates the correct Nano Flash pre-flash mode for

your camera.

5. Turn off the Nano Flash by setting the Pre-

f. Test the Watertight Seal of the Nano Flash

After closing the Nano Flash, always test it in a shallow water pool prior to diving

with it, in order to verify that it is perfectly watertight sealed. Make sure no

bubbles escape from it and that no water enters the housing.

Image #4:

3 pre-flash programs

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Fantasea-line Nano Flash Action 700 Lighting Set Manuel d'utilisateur Page 6