5
Canon G Series Adaptors & Filters Instruction Manual 2011016
g. In order to remove the adaptor or filter from the lens port, start by detaching the bungee cords from
the housing and follow by removing the adaptor or filter from the lens port.
h. When removing the adaptor or filter from the housing lens port, it can be conveniently stored by
mounting it on the EyeGrabber Canon G Series (Cat. No. 4054). This lens holder attaches to any
standard Flex or Ball & Joint arm and enables safely securing Canon G Series lens accessories during
the dive, making them easily available for future use. For further information, please visit our
website at www.fantasea.com/FantaseaEyes
4. Installing Color Correction Inserts inside the EyeDaptor G Series-F67 or BigEye Lens G Series
a. Color correction inserts included with the RedEye/PinkEye Filter G Series can be installed inside the
EyeDaptor G Series-F67 or BigEye Lens G Series for the purpose of producing vivid and colorful
images or videos while making use of macro and wide angle accessory lenses. A dedicated slot was
designed on these accessories in order to allow for easy installation of red or pink color correction
inserts.
b. In order to install a color correction insert inside the EyeDaptor G Series-F67 or BigEye Lens G Series,
first remove the EyeDaptor or BigEye Lens from the housing lens port (see section #3, paragraph
“g”).
c. Remove the color insert from the RedEye/PinkEye Filter by gently pulling the secure string of the
color insert till the insert pops out of the adaptor.
d. Installing the color insert inside the EyeDaptor G Series-F67 or BigEye Lens G Series is the same as
when installing it inside the EyeDaptor G Series. Please refer to section #2 for installation and
removal instructions.
e. Make sure that the color insert is secured with a secure line to the housing, arm or lens accessory so
you do not lose it once removed.
5. Using Color Correction Filters Underwater
a. Note that exposure and white balance settings might require adjustments once a color correction
filter is installed on the housing lens port.
b. If taking photographs in the manual shooting mode, exposure settings should be slightly adjusted in
order to compensate for the light absorbed by the color correction filter. This can be done by using
slightly larger apertures or slower shutter speeds.
c. If making use of the camera manual white balance function, it is important to measure white every
time the filter is installed or removed from the housing lens port. Alternatively, measured values can
be stored in any of the customized shooting modes of the camera for quick and easy adjustment
whenever installing or removing the filter.
d. Note that when a color correction filter is installed, making use of a flash will result with reddish
images in most compositions, due to an overcompensation for loss of red colors underwater. It is
therefore recommended to either turn off the flash or to manually adjust colors with the camera
when making use of a color correction filter.
6. Care & Maintenance
1. Please use the utmost care and do not use excessive force when assembling and disassembling the
different accessories, in order to not cause any damage to the products.
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels