3
EyeGrabber Canon G Series Instruction Manual 20110615
g. Hold the lens holder against one of the sides of the T2 Connector
attached to the arm, so that the lens holder is facing out of the
arm and the lens holder’s connector is aligned with the T2
Connector. Make sure that you attach the lens holder on the T2
Connector that faces outward from the housing, so you will have
more space to mount the lens on the EyeGrabber. Slide the lens
holder on the T2 Connector and tighten the screw on the lens
holder in order to fix its position (image #5). It is important to
ensure that the lens holder connector and the T2 Connector are
perfectly aligned prior to tightening the screw, or else the lens
holder cannot be stabilized on the arm.
h. Install the snap cord of the accessory lens on the arm. If you had
the snap cord attached to the housing before, remove it and
install it on the arm instead, so the accessory lens can be secured
when mounted both on the housing lens port and the
EyeGrabber.
i. Mount the arm, with the EyeGrabber installed, on your housing tray or handle.
2. Installing and Removing Lens Accessories from the EyeGrabber
a. Installing and removing lens accessories from the EyeGrabber during
the dive is the same as when installing and removing from the
housing lens port. In order to install the lens accessory on the
EyeGrabber, first hold it in your hand so it is aligned with the
EyeGrabber (image #6). Place the lens over the EyeGrabber and
follow by securing the four bungee cords to the slots featured at the
back of the EyeGrabber diagonally (image #7). Please note that the
lanyards are essential in order to keep the lens accessory in place.
Make sure that the accessory lens is properly mounted on the
EyeGrabber by gently trying to pull it out. If properly installed, the
lens should not easily come off the EyeGrabber.
b. It is recommended not to detach the secure line from the accessory
lens during the dive, whether if mounted on the arm or on the
housing lens port.
c. In order to remove the accessory lens from the
EyeGrabber, start by detaching the lens lanyards from
the EyeGrabber and follow by removing the accessory
lens from the EyeGrabber.
d. After the dive, detach the lens accessory from the
EyeGrabber and rinse all components in fresh water.
Dry with a soft clean cloth and store safely.
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels